Vilene G700-10 is a mid weight, woven, fusible, interfacing. Woven interfacings can be used for all sewing projects, but are particularly useful when sewing clothing, where you want to retain the natural drape of the fabric. This interfacing is best used with mid weight cottons - just like we sell here at Prints to Polka Dots.
Once fused the fabric can be washed upto 60 degrees (unless the fabric care instructions are lower).
You can buy this interfacing in:
- 25cm or 9" increments, the more you order, the longer your piece gets (the interfacing is 90cm/35" wide).
- 45cm x 50cm pre cut pieces, the more you order the more pre-cut pieces you will receive.
BUYING IN BULK?
SAVE 8% when you buy 8 mtrs/yards or more.
SAVE 15% when you buy 15 mtrs/yards or more (for orders of 15mtrs or more, please allow 5 days for delivery).
SAVE 20% when you buy 25 mtrs/yards or more (for orders of 15mtrs or more, please allow 5 days for delivery).
How to Use:
Like all interfacings made by Vilene, the interfacing is always cut in a lengthwise direction, and thereby follows the grain of the fabric. Place the interfacing with the coated side on the wrong side of the fabric, glide the steam iron, on cotton setting, slowly over each area 6 x or cover with a damp cloth and press each area for about 12 seconds, without moving the iron.
Allow the pieces to cool flat for about 30 minutes, so that the adhesive can set properly.
We strongly recommend that you attach a small piece of interfacing to a fabric remnant with your iron first to make sure that the hold and the adhesion meet your expectations.
For more information:
To view our guide to interfacing - click here.
Take a look at Vilene's own guide - click here.
View Vilene's product video - click here.
Write a reviewYour Name:
Your Review: Note: HTML is not translated!
Rating: Bad Good
Enter the code in the box below: